Basic Info.
Journal Diameter Dimensional Accuracy
IT01-IT5
Journal Surface Roughness
2.5-0.63μm
Stiffness & Flexibility
Stiffness / Rigid Axle
Axis Shape
Straight Shaft
Material
Stainless Steel or Aluminum
Transport Package
Paper Cores or Wooden Box
Product Description
Product Description
Aluminum Lug Type Air Shafts
Differential Air ShaftDifferential Shaft is a sophisticated winding shaft for slitter re-winder machine, used as duplex shaft winder (centre winding type).
It is capable of compensating speed variation due to gauge variation with multi cores. Minimum 20 mm core width is possible. Reel holding is possible at any position across the width. No-time lost in re-positioning cores since no distance pieces are required. Shaft can run at very high speed.
This shaft consists of slotted shaft, rubber bladders, hard and ground steel cage with ball type gripper.
Sizes
Suitable for core ID. 3″ and 6″ Length as per requirement.
Capabilities
Load up to 2 tons Suitable for Core l. D. dia 3″, 4″, 6″, 8″ (metric size and special sizes also produced) Length as required Speed up to 1000 Mtrs/min Suitable for core materials: Paper, Steel, Thermoplastics Minimum core width 20 mm
General Materials of Construction
Pipe - Steel End Generals - Steel - simple or hardened Cam - Brass Lugs - Hardened Steel / Rubber
Air Shaft ManufacturerHuiyuan SHAFTQUICK LOCK SHAFT
Economic model for Re-winder shaft having all the advantages like slippage, accommodating gauge variation, smaller core width etc. With only limitation of time needed for repositioning of the core. This shaft is suitable for Paper Cores.
Sizes
Suitable for core I.D. 3″ & 6″ Length as per requirement Individual Quick Locks are also available having width of 50 mm, 36 mm, 25 mm and 20 mm. The bore of Quick Lock is tailor made.
MULTI-TUBE SHAFT
This is a very commonly used shaft. It mainly consists of slotted pipe, journals to suite users machine, lugs, rubber bladder and non-return valve. These types of shafts are suitable for both unwinding and winding stages. It can accommodate single core, multi cores of the width more than 50 mm. Type of pipe material, lug material are decided based on duty conditions like load, speed and core material. The limitations are, it cannot take care of gauge variation or individual core speed variation since slippage is not achieved and core width less than 50 mm.
Sizes
Suitable for Core ID. dia 3″, 6″, 8″ (metric size and special sizes also produced) Lengths as per customers requirement
LEAF TYPE AIR EXPANDABLE SHAFT
This type of shaft mainly consists of slotted base pipe, metal leaves with knurling/serration, rubber bladder, non-return valve and suitable journals.
This type of shaft can be used at unwind station, but mainly used at rewind stage for advantages like:
Narrow width of core To prevent damage to thin cores (100 % support available to the core ID.) At times core-less winding is also possible
This also has a limitation to accommodate gauge and speed variation.
Sizes
Suitable for core ID. 3, 4 and 6 (metric size and special sizes also produced) Lengths as required
Lug Shaft:
Grippers are slit through the metal pipe & the pneumatic bladder is used for inflating. The grippers give positive holding of the core.
> These shafts are strong & ridged
> Standardized design allows us to manufacture the shaft in any size diameter
> The same design can be offered for heavy duty to light capability shaft
> Simple design ensuring a long service
> Staggered lug design makes it best in winding application
> Each gripper offers a designed chamfer for easy core insertion
> Dimensional tolerance of journal is very tight for better fitting & rigidity during operation
Material:
> Pipe: Steel or aluminum
> Lug: Steel, Rubber or Plastic
Available Size:
> Core ID from 2″ to 12''
> Length up to 4000mm
Option:
> Cantilever shaft
> Various size of lug (Gripper)
Ball Shaft:
A Shaft specially designed for slitters to handle constant tension on multiple slit. The base steel shaft has multiple bladders, mounted with Ball Locks for reel holding.
> Small width winging possible at very low web tension -A solution for Sensitive Material.
> Each slit material can slip at a different speed and same tension.
> Ball lock with spring design minimizing side movement while setting and running.
> Automatic tension controlling through rotary union in dynamic condition by signals from machine drive.
Available Size:
> 25mm
> 3″, 4″, 5″, 6″ any size possible
> Minimum ball lock width 24 mm onwards
Multi Bladder Shaft:
The Multi Bladder Shaft is made of Aluminum Extrusion with steel journals shrink-fitted for High Torque capability. It is assembled with a PU tube for longevity.
> the Multi bladder is very light and allows easy handling.
> Easy and quick in-house maintenance.
> One can mount core of any width as small as 4mm for slitter rewind.
Material:
> Pipe: Normally Aluminum extrusion. We use steel pipes in case of heavy requirement
> Lugs: Rubber, plastic, and Aluminum
Available Size:
> Core ID: 3″ to 12″ Length up to 3,000 mm (120″)
Option:
> Grapples can be offered as per holding requirements.
> I.E. rubbers, Engineering Plastic, and aluminum.
> We offer one piece steel Body for heavy torque.
SPARE PARTS OF AIR SHAFT
We always have following Spare Parts and accessories for most types of Air Shafts and Air Chucks readily available from Stock:
Valve Hose Assemblies Protection Strip Brass Inflator End Inflator Chuck Rubber Nozzle End Continuous Rubber Lug Inflator Chuck Split Clamp Inflator Gun Standard Inflator Stem
We have.
Rubber Tube of any size Midget valve 1/8″ GAS-NPT, brass Nipple valve, brass, for air hose Rubber hose, width 15.5 mm & 19.5 mm Protection strip, width 15.7 mm & 19.7 mm Clamp, top, width 15.5 mm & 19.5 mm Clamp, bottom, width 15.5 mm & 19.5 mm Flat spring, width 16 mm -0.50/+0.00 & 20 mm -0.50/+0.00 Continuous rubber lug, width 15 x 0.6 H 9.2 & 20 x 0.6 H 8.3 Inflator gun, metal, 1/4″ NPT, with rubber stud, incl. 2.5 m polyurethane hose
FAQ
1. Q: Are you a factory or trading company? |
A: Factory, which was established in 2012. Specialized in providing expert service, including design, manufacture, installation & maintenance for air shaft,friction air shaft,aluminum roller,packeging printing machinery parts. |
2. Q: What is the term of payment? |
A: T/T,L/C,Western Union,Paypal are available. As usual, pre-paid full payment or 30% deposit then pay the balance before delivery. |
3. Q: What is your delivery time? |
A: It depends on the order quantity and requirements. Generally, within 20 work days for ordinary order quant after receiving the deposit. |
4. Q: Which port will be used as loading port? |
A: Shenzhen port, the closest port to us, is recommended strongly as loading port. |
5. Q: May I know the status of my order? |
A: Yes. We will send you information and photos at different production stage of your order. Every step will be send to you in time. |
Contact:
Tony Chan
Tel: (+86) 76987888135
Fax:(+86) 76986346382
Phone:(+86)15899911321
Our factory can design and manufacture no-standard products according to customers' requirements.
Please feel free to contact me for storage equipment any time.
We can quote you upon request, and will reply you within 24 hrs.
Address:
Cn, Room 102, Building 2, No. 7, Xinyu Street, Qingxi Town, Dongguan, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Industrial Equipment & Components, Manufacturing & Processing Machinery, Packaging & Printing
Company Introduction:
Dongguan Huiyuan Machinery Technology Co., Ltd. Is an innovative enterprise specializing in the research and development, manufacturing of air expanding shafts, slip differential shafts, cylinders and other packaging printing machinery accessories. Our company has introduced advanced production management technology and research and development concepts from*** manufacture high-quality products for customers.
Our company has precision production equipment, strict production processes, and advanced production technology. The chief engineer has more than 30 years of industry experience, and our core production employees have more than 15 years of industry experience. Our factory always adheres to the concepts of leading technology, paying attention to details, and striving for excellence, and produces high-quality products and thoughtful after-sales services for our customers. Based on innovation, we are always committed to continuous innovation, research and development of new technologies and new products to meet customer needs. This is also our eternal purpose.
The main products of huiyuan Machinery included: Differential air shaft, friction ring, air shaft, air chuck, aluminum alloy guide roller, safety chuck, various air shaft, friction air shaft etc. Related accessories and after-sales maintenance services.